Stlblog352

Installing CCS Programmer/Debugger USB Drivers

AMD Rolls Out Its First 2021 Graphics Driver - Get Radeon 21.1.1 Intel Adds Support for Iris Xe Max Graphics (DG1) - Get Version 27.20.100.9168 The New RTX 461.09 Graphics Driver Adds Support for NVIDIA’s A40 GPU. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues.

These instructions were written using Windows XP and Windows 7 as a basis. Other versions of Windows may have slightly different procedures, but these directions are similar enough to provide a general guide for installing the USB drivers for programmers/debuggers.

Checking if USB Drivers are Installed Correctly

1. Connect the programmer/debugger to the PC.
2. Right-click on My Computer and click Manage in the pop-up menu.
3. When the Computer Management window appears, click Device Manager in the pane on the left side.
4. When the Device Manager opens in the pane on the right side, click the '+' sign or white arrow next to Universal Serial Bus controllers to expand a list of USB devices. The programmer/debugger should appear in the list if installed correctly.

5. If the programmer/debugger does not appear under the Universal Serial Bus controllers, either the USB drivers have not been installed, the programmer/debugger has not been associated with the correct drivers, or the programmer/debugger is unrecognized. Follow the procedures below to correctly install the USB drivers in order to use the programmer/debugger.



For additional help troubleshooting USB driver installation, contact CCS Technical Support.

Installing USB Drivers

1. Run the setup executable for the USB drivers.

Using the CD-ROM

1. Insert the CD-ROM into the CD drive. Once the CD-ROM is loaded, an auto-run menu will appear.
2. Make sure the circle next to Programmer USB Drivers is blue and click the Install button.
3. If the CD-ROM does not auto-run, the USB driver setup can be started by double-clicking the CD drive in My Computer and double-clicking the setup executable in the USB-Driver folder.

Downloaded from CCS Website

• The most up-to-date USB drivers can be downloaded online from the CCS website.


2. Once the installer starts, follow the on-screen prompts to select an install location and begin the installation process. If using Windows Vista, 7, 8, 8.1 or 10, a prompt may appear asking if the driver should be installed even though the publisher cannot be verified. Click the Install this driver software anyway option.

3. After the USB drivers have been installed, a prompt will appear on-screen asking for the programmers/debuggers to be connected in order to associate the drivers. While this prompt is on-screen, plug-in the programmers/debuggers being used and Windows will attempt to associate the proper drivers for the connected programmer/debugger. Click the Next >> button after the drivers have been associated with the connected programmers/debuggers.

4. After the USB drivers for the programmers/debuggers have been installed, click the Finish > button to complete installation.

NOTE:

• If using Windows Vista, 7, 8, 8.1 or 10, after the USB driver installation has completed, a prompt may appear stating that the program may have been installed incorrectly. Click the Reinstall using recommended settings option to re-run the USB driver installer. Repeat steps 1 - 4 to ensure the USB drivers are installed correctly.

Cms Usb Devices Driver Windows 10

Associating USB Drivers Manually

If the New Hardware Wizard prompt appears, or Windows will not automatically associate the drivers for the programmer/debugger, the USB drivers can be associated with the connected programmer/debugger manually.

1. If the New Hardware Wizard prompt has not appeared on the screen, right-click on My Computer and click Manage in the pop-up menu. When the Computer Management window appears, click Device Manager in the pane on the left side. When the Device Manager opens, in the pane on the right side, find the connected programmer/debugger in either the Other Devices or Universal Serial Bus controllers lists. Right-click on the programmer/debugger and click Update Driver Software.. in the pop-up menu.

Select the version of Windows the USB drivers are installed on:




Using Windows XP and Older

2. On the New Hardware Wizard prompt, select Install from a list or specific location (Advanced) and click the Next > button.

3. Next, select Don't search. I will choose the driver to install and click the Next > button.

4. Next, click the Have Disk.. button.

5. On the prompt that appears, click the Browse.. button to navigate to the directory where the USB drivers were installed, then click OK.

6. The name of the programmer/debugger being associated should now be displayed in the list, click the Next > button.

7. During the installation process, a prompt may appear asking if the driver should be installed even though it is not verified. Click the Continue Anyway button.

8. After the USB driver for the programmer/debugger has been associated, click the Finish button to complete installation.

Unknown Usb Device Driver Download

Using Windows Vista, 7, 8, 8.1 or 10

2. On the New Hardware Wizard prompt, select Browse my computer for driver software.

3. Next, click the Browse.. button to navigate to the directory where the USB drivers were installed. Make sure the Include subfolders option is checked, then click Next.

4. A prompt may appear asking if the driver should be installed even though the publisher cannot be verified. Click the Install this driver software anyway option.

5. After the USB driver for the programmer/debugger has been associated, click the Close button to complete installation.

Programmer/Debugger Unrecognized

Cms Usb Devices Driver Update

When the programmer/debugger is connected and unrecognized by Windows, either the USB drivers were installed incorrectly, or Windows is unable to find the correct drivers.

1. Right-click on My Computer and click Manage in the pop-up menu.
2. When the Computer Management window appears, click Device Manager in the pane on the left side.
3. When the Device Manager opens in the pane on the right side, click the '+' sign or white arrow next to Other Devices to expand a list of devices unrecognized by the PC.

4. If the programmer/debugger appears in the list under Other Devices, right-click on the programmer/debugger and click Uninstall in the pop-up menu. A prompt will appear asking to confirm device uninstall; click the OK button. If given the option, check the Delete the driver software for this device box.

5. After the programmer/debugger is uninstalled, disconnect the programmer/debugger and restart the PC.
6. Once the PC has restarted, reinstall the USB drivers by following the Installing USB Drivers section above.
7. After the USB drivers have been reinstalled, restart the PC before connecting a programmer/debugger.
8. Once the PC has restarted, connect the programmer/debugger. Open the Device Manager and click the '+' plus or white arrow next to Universal Serial Bus controllers to expand a list of USB devices. The programmer/debugger should appear in the list if installed correctly.

Cms Usb Devices Driver Download

• August 22, 2019 2.9.8

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.8	Released August 22, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added several internal interfaces for particular sensors (J003).

• January 25, 2019 2.9.6

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.6	Released January 25, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added missing Tonemapping Auto property.

• May 4, 2018 2.9.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.5	Released May 4, 2018	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.

• November 21, 2017 2.9.4

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version Drivers apperson education products port devices. 2.9.4	Released November 21, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Repaired not working J003 mono sensor pattern fix on particular video formats. This driver version is the last that works in Windows XP.

• January 9, 2017 2.9.3

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.3	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added a pattern fix for J003 mono sensors.

• January 9, 2017 2.9.1

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.1	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.

• January 15, 2016 2.8.9

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.9	Released January 15, 2016	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Changed certificates so that the driver can also be installed in Vista.

• November 9, 2015 2.8.7

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.7	Released November 9, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed an error which can appear when using sharpness on older CPUs.

• October 20, 2015 2.8.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.5	Released October 20, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed a bug which can appear on LivePause call.

• July 15, 2015 2.8.0

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.0	Released July 15, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support of DFK ECU010-L34 with serial number property. Added tone mapping.

• February 17, 2015 2.7.33

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.33	Released February 17, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.

• February 5, 2015 2.7.32

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.32	Released February 5, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.

• January 14, 2015 2.7.31

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.31	Released January 14, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support for IMX236 based cameras. Support for RGB64 color formats. Several performance improvements.

• June 6, 2014 2.7.9.1152

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.9.1152	Released June 6, 2014	Type ZIP	Filesize 2.1MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast. Added new property: Highlight reduction. Added new property: White balance temperature controls. Pixelfix for Y16 cameras now works as expected. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.

• January 1, 2014 2.6.5.1014

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.6.5.1014	Released January 1, 2014	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed missing auto-gain for DFK AFU130. Fixed focus when start value is out of auto_focus_range. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong. Fixed auto focus ROI not working for 21*UC cameras. Fixed crash on load/connect with certain cameras 22/72xUC. Fixed previous exposure settings not being loaded on reconnect. Complete reworking of internal property system. Fixed Windows XP driver load crash. Fixed drop counter to be accessible from DirectShow. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible). Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.

• February 26, 2013 2.4.14.851

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.4.14.851	Released February 26, 2013	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog WHQL certification.